ERG, HR modes (ERG, HR, SLOPE) grayed - BKOOL trainer

Mobile Apps
1

I am new. My first workout with mobile app on iphone is behimd me. I have connected my Bkool trainer. Ap is collecting and showing my HR, watts from trainer, target watts and cadence. Except possible choice of modes are grayed out and in difficulty does not change with the change od targeted watts.

Any suggestions?

Thanks in advance.

Bine

2

Hi Bine, our app only supports the standard protocols. FTMS, FEC over ble and most or all Bkool devices do not use one of those as I understand. So we can read your trainer but sadly we can’t control it… If you have Android with Ant+ or iOS you could get a converter to FTMS it is possible.

3

Thanks Alex,

I have IPad, iPhone, Garmin Fenix watch, Garmin app on iOS… is there some combination to control Bkool with these? And use your workouts and plans transfered to Garmin?

Thanks!

4

Yes, you can push workouts or a plan to Garmin connect and use your Fenix to control the Bkool.

You can see that Fenix says it is supported here for Ant+ and Bkool says it works with Ant+
https://support.garmin.com/en-US/?faq=CHnxYj6F2OA6tN4QRRjEJ8

Also this device would allow you to use our app

5

Thanks Alex,
I found out, Fenix 3hr isn’t capable of controlling my Bkool. To old.
With this Wyur I wouldn’t need Fenix?

6

Correct, you could use our app directly with Wyur. But I have never tried this so I can’t be 100% sure this will work. But if your Bkool works with other Ant+ apps or devices then it really should work with Wyur.

This says Wahoo Systm will work with NPE Cable (Wyur is new verion of Cable). So it really should work.

https://wahoofitness.yonyx.com/y/conversation/?id=2e6971b0-122e-11eb-96f1-4201c0a80177&did=de411af0-d96f-11ee-a262-4201c0a8012a&lang=en